parts

If you decide on a non-genuine part over a real Cummins part you’ll face many dangers that are hidden. there is a world of a difference while it may not be obvious to our natural eyes. Their differences in strength, specifications, and dimensions. These could greatly decrease the efficiency and life of your Cummins engine let’s have a look at the piston. The piston is a critical component that’s always working in stressful environments.

For the raw materials that conjure the piston, the tensile strength of the raw materials in a very genuine Cummins piston is over 30% as compared to a non-genuine part. An enormous 30 percent difference !!! This directly affects the reliability and lifespan of the piston.

There is tremendous force transmitted from the piston to the rod via the piston pin, therefore the diameter of the bore must match the pin perfectly. The non-genuine part doesn’t match in terms of diameter size that you just might think only 0.03, 5% difference that is negligible. This difference seems insignificant to the attention. However, it can result in fatigue cracks within the pin bore which can bring severe damage to your piston.

The other component is the highest ring on a piston which directly affects emissions and oil consumption. So, as to run clean and efficiently, it should be correctly positioned per the right angles to avoid top ring scuffing. However, the non-genuine part incorporates a slight difference between the angles. Again the numbers might look small but the difference is great whether or not it can not be identified with the eye. the risks you take or come by engine output, power overheating, higher emissions, and excessive oil consumption that also means more maintenance and costs.

A genuine Cummins rod bearing is constructed of six layers. However, within the non-genuine product, all the materials are incomplete, except the steel back, which effectively means they only have three layers rather than six.
This could lead to:

a)Connecting rod bearing corrodes.
b)Rusts the shortage of lining needs.
c)Poor reliability during emergency situations.
d)Misalignment overheating by under lubrication or oil starvation.
e)Catastrophic failure.

Just the failure of one critical part will mean downtime for your engine, which ends up in lost business opportunities and profits while your engine is being repaired.

Genuine Cummins parts use the newest material with state-of-the-art technology, Cummins provides a best-in-class warranty, and Cummins is backed by 7100 service locations around the world, Like G.B Truck and Diesel acts as an authorized Cummins parts dealer in Edmonton.

The difference between a real Cummins part and a non-genuine part is often invisible to the attention but the results are great. One should not sacrifice reliability and take unnecessary risks in operations

Buy genuine Cummins parts from Cummins authorized dealers like G.B Truck and Diesel in Edmonton.